System profiles are manufactured by using extruded aluminium. The system is painted by the electrostatic powder coating method. All bolts, screws and pins are made of stainless steel. The system blades, designed to be resistant to weather conditions and the size of the blade at the maximum level, are 17 cm. At the top, there is an elegant elongation profile above the grooves, which are intended to hide the blades.
The system blades, designed to be resistant to weather conditions and the size of the blade at the maximum level, are 17 cm. At the top, there is an elegant elongation profile above the grooves, which are intended to hide the blades. This provides extra strength to the groove and minimizes the deviation between the two legs. With the extension profiles, the length of the groove part reaches 27.3 cm. If more than one system is used, 13×13 cm box profiles are integrated into the corner legs and 22×14 cm legs in the middle. Water drainage is ensured by a well-designed water flow plan.
The maximum size of a single module is 450×600 cm. Blades can be opened up to 90 degrees; and inside, in parallel with the demands, it shall be possible to choose the direction, in which the blades shall open, according to the amount of light or shadow. The fully enclosed BIOS/Climatic is waterproof; and, water is drained through integrated grooves; and, columns act as drainage pipes.